You may have noticed more humidity than usual on recent cold days. What does it mean? That the insulation in the house is not working as it should, so you might need some reinforcement or indeed a new wall. From DIY, now we want to tell you how to place a plasterboard wall in your home step by step.

how to place plasterboard

Therefore, in order not to embark on so many works and to avoid ruining ourselves in the attempt, we will teach you how to place a plasterboard wall at home.

What is Pladur?

home improvement - man stops indoors

home improvement – man stops indoors

Pladur is the trade name for a material that allows us to make “false” walls. It has become so popular that everyone is talking about these walls as plasterboard walls, although it might be appropriate to say that they are plasterboard walls, arranged separated by cellulose or cardboard.

They have become the most popular alternative to laying a wall because they are easy to install (relatively) and also very resistant to plaster compression and association folding by cardboard. On another side, we can choose from a wide range in terms of size and thickness,and it will depend on each customer or manufacturer to arrive at the desired product.

Why Pladur?

because plasterboard

It looks like we are talking about a light and cheap material, but it is sheets of plaster that they insulate the walls from the cold from the outside, in a very efficient way and which is placed in the houses so that the cold does not arrive. They have other advantages, in case you want to know more about this material.

  • Soundproofing effect, because it has three layers of two different materials.
  • Prevents moisture from entering.
  • Easy to place, because its design allows it to be easily adapted and cut.
  • Lightweight yet powerful insulation.
  • The finish is aesthetically better and much more elegant than that of a brick wall since you maintain the quality controls of the factory.

Does plasterboard have any drawbacks?

disadvantages-plasterboard

We have already seen the main advantages that can be found when working and making plasterboard walls, but does this material have any drawbacks? Not a lot of truth, although we can say that being a product is something specific you need a workforce that knows what they’re doing, or at least that for their placement and layout, they give us all the steps correctly (as we’ll do now).

Band for example, it’s complicated if you don’t have a lot of experience because if this is not done correctly, air bubbles can appear which will eventually deteriorate the final finish.

Other the disadvantages are drills but, using plugs or light boxes, They are usually easy to acquire, you can fix furniture or hang pictures on these walls without drilling holes and quite easily.

How to install a plasterboard wall at home – step by step

Now that you know something Equipment, it’s time to get down to business. Quiet, it will be something very simple, so much so that you will want to do it all over the house.

We need

  • Pladur plates approximately 12 to 13 millimeters thick
  • Cutter
  • Mountain chain
  • Adhesive plaster
  • level
  • Putty
  • Flashing strip
  • Sandpaper

Take a look at the catalog of Bricomarkt. You will find everything you need.

How to Install a Plasterboard Wall at Home: Preparing the Wall

how-to-put-a-plasterboard-wall-cleaner

We will clean and dry the entire surface, so that there is no dirt. If the wall you are going to put it on is porous, moisten it half an hour before.

How to install a plasterboard wall at home: cut the slats

how to place a plasterboard wall at home

You just have to mark with the cutter, in a deep way, the mark where you want the ribbon to be cut. With a sharp blow, you can cut it cleanly. If the contour is curved, you need to help yourself with a saw.

How to place a plasterboard wall at home: Place the drywall on the wall

how to place a plasterboard wall at home

We apply a good amount of adhesive plaster and place the plasterboard. We level it, to check that it is correctly placed and thus use it as a reference, for the other slats. We put them together well.

How to install a plasterboard wall at home: sealing the plasterboard wall

how to place a drywall sealer

When the plates are in place, simply apply a fair amount of sealant to the joint area and with a little duct tape secure it. You just need to apply a little more putty and let it dry.

How to place a plasterboard wall at home: finalizing the details

how to place a wall of plasterboard at home sand

When you have it dry, with sandpaper you remove the remnants and then you can prime it so you can paint or wallpaper it.

In case you place the Pladur panels On a wooden frame, the procedure would be similar, but you would have to use a drill to get the Pladur sheets to sit tightly on the wood, trying not to screw flush with the sheet.

The separation between the joints should be greater and the amount of sealant to be used, obviously too. But otherwise, the process is the same.

Now that you know how to place a plasterboard wall at homeWith the help of this step by step you will be able to continue doing it for the rooms that need this insulation the most and quickly.

How to paint on drywall

Interior of green room.  3D design.  Light - LED cord, spotlights and sunlight.

Finally, we would like to explain to you that once your plasterboard wall is installed, you may want to, and in fact we recommend that you paint it so that it will be as easy as painting any other wall taking into account several points.

Most recommended is that before painting, apply a primer to the entire surface, so that later it has a better finish and the paint is better fixed.

If the plasterboard wall is already painted and you want to change the color, you will need to remove the paint first it already exists. To do this, the surface will need to be moistened with water and with the help of a brush, then the old paint will be carefully lifted with a spatula.

If the paint already on the wall is plastic, there is no need to lift the paint, Only in those areas where it has grown or created pockets, to fix the wall, you can apply a little putty before painting again with the desired color.

If the previous paint is synthetic or oil-based enamel, you will also need to lift only in areas where it is loose. or with irregularities, and as we have already said, you need to apply putty, let it dry and sand it to even the surface.

It is necessary that for the best result you apply at least two coats of paint and for it to look professional the second coat should go perpendicular to the direction of the first coat.

If you want to know more about how to do your homework and crafts, you can read this other article that will surely interest you:

HOW TO PLACE A FLOATING BRIDGE ON OUR FLOOR