When we think of a stretcher table, the usual thing is that the classic wooden round table comes to mind. Do you know what we are talking about? These somewhat boring tables, which had space for the brazier inside, and which have traditionally been dressed in skirts on the floor.

Well, these are very useful side tables. Although each time they see less, there are areas where they are still very popular. And they’re used for a lot of things, and they adapt well to any space.

But like everything, stretcher tables have evolved. And although the round shape is the most popular, there are already stretcher tables of all styles. More and more, they seem rectangular. Perhaps the change is due to the need to adapt to new soils that are much smaller than before.

Dressing a round table is easy, but How to make a rectangular table skirt? Everything no longer works, and it is more difficult to adapt the skirt to this shape. In today’s article, we explain how to do this. Tip: the key is to make clips from the fabric.

How to make a rectangular table skirt

In the case of the round tables, there was only one option, which could then be more or less elaborate. It was a large circle of fabric that was centered in the middle of the table and was falling.

But how do you make rectangular table skirts? Although the challenge is greater, there are also many other possibilities:

  • Cape-type skirt.
  • Belted skirt.
  • Table skirt.

Depending on your style and taste, you can choose one model or another. Although you also have to take into account the way you sew. The cape skirt is the simplest, because it is a suitable version of the skirt for round stretcher tables. The entire table should be covered, measuring the table and the height, and leaving enough fabric between the front and the side, falling in waves in the corners of the table.

The key in these types of skirts is to properly measure each part of the table and draw the pattern before cutting the fabric.

If sewing is your thing, you will prefer to make a plank skirt or one with gusset, since they adapt better to the table and do not let the fabric slip. While it’s harder to get your legs under the table with these types of skirts, keep that in mind!

How To Make a Rectangular Table Skirt | Reasons

The first model we offer is the rectangular cape-type table skirt. As you can see, in the center of the table the table was measured, and as if it was unfolding on either side, the height of the legs was measured. Joining the sides with a curve is what will do this later on the fabric at the corners.

In any case, whatever pattern you use, Always keep in mind that you must leave room for sewing the hem. At least 5 centimeters to be able to handle it well.

To make a skirt with darts, boards or gussets, you need more skill and also more fabric. Of course, the finish is worth it, as it allows you to adjust the skirt much more to the table.

These skirts may have pleats only at the corners, leaving the rest of the skirt smooth. But also can be covered with tweezers, which gives it a moving air and a good fall. Or put tweezers in the corners and in the middle of each side of the table, allowing you to easily place your legs under the table.

The more pleats you make in the skirt, the more dressed the table will be. Of course, more fabric will be needed and the skirts will take up more space around the table. Think carefully about how you want the final finish to be.

How To Make a Rectangular Table Skirt | materials

What do you need to know how to make a rectangular table skirt? As with any other type of sewing loom, the materials are:

  • Threads in the correct colors for the chosen fabric.
  • Frame wires.
  • Tape measure or tape measure.
  • Of.
  • Needles
  • The scissors.
  • Pins and cushion to prepare the pieces.
  • Sewing machine.
  • Pencil or chalk to mark the patterns.

These are not difficult pieces to sew as most of the lines are going to be straight. With a sewing machine, you can finish the job in a very short time. Of course, if this is your first time sewing something like this, try a piece of fabric first and throw it away. This way, you will be able to gain ease and see how tight or loose you want the seams to be.

And of course, the most necessary is: the fabric. There are those that make a single skirt, and others combine two different fabrics with a skirt down to the feet and a shorter one that covers the top of the table. It’s a question of taste.

If you are going to combine two fabrics, We recommend that one of them be smooth, so as not to visually overload the space. And in general, if the room where the table will be located is not very large, try to have few designs or prints.

How to make a rectangular stretcher table skirt step by step

The first thing you need to do when planning to create a rectangular table skirt is Decide on the type of skirt you want to sew. You know: cape type, with clips, with bellows or with planks. Which one do you like the most?

And the next step is find out if you only want a skirt or two. In the case of choosing two, it is not necessary that both are made with the same technique. Identical to impressions, styles can also be combined.

Then, take the measurements of the table. This is especially important if you want the skirt to reach the floor. AND Always keep in mind the minimum 2 inches for the hem. If you fail it will look pretty ridiculous. And if you pass, the skirt will slip off and can end up being very boring.

All you have to do is adapt your measurements to the patterns of the chosen model. From here, sew the piece with a sewing machine will be a piece of cake. Enjoy your new rectangular stretcher table skirt!

Discover other textile professions to dress up your home: