One of the electrical devices with which we can suffer the most in the event of a possible breakdown is without a doubt the washing machine. It is an essential element for the proper functioning – and accomplishment – of the day-to-day tasks of our homes. Because washing clothes by hand already looks like something from prehistoric times, right?

This is why, when we detect the slightest problem in our washing machine, we must act as quickly as possible. Or, better yet, perform preventative maintenance. The most common signal that sets off all alarms is a water leak under our washing machine as soon as we turn it on. If this has happened to you and you don’t know why, don’t worry, in this article we will show you its causes and possible solutions to such an annoying event.

how-to-prevent-water-from-under-the-washing machine

Does water come out from under the washing machine | The causes

Washing machines are stupendous machines. But, like all electronic devices, they can suffer failures throughout their useful life, especially if we don’t apply maintenance tasks or if we don’t use them properly. As we’ve pointed out, water leakage from below is the most common problem in washing machines, but it’s also true that the causes behind it are relatively easy to fix. Next, we’ll explore the possible causes:

Excess detergent

We are faced with one of the most common mistakes – placing too much soap in the corresponding drawer of the washing machine. This causes the production of an excessive amount of foam that the machine cannot absorb, thus creating a water overflow which, in time, could be the cause of an excess of water which would eventually seep under the machine. apparatus.

Clothing overload

Another typical mistake: we believe that by putting more clothes in the washing machine drum, we will save future washes since we benefit more from the load. But, in the long run, it leads to overweight issues that can lead to water leakage.

Incorrect installation of the drain hose

The drain hose is a fundamental part of the equipment of a washing machine, as it is responsible for expelling all the water that has entered it. There could be a possibility that it is loosely attached to the drain and therefore not draining the water properly.

Clogged drain hose

It could also be that the drain hose is properly installed but not letting water out anyway. This usually happens due to the passage of time or poor maintenance. Or in other words: not to clean the remains of dirt and limescale encrusted in the pipe.

Door that does not seal well

Although the washing machine door that gives access to the drum may seem like it closes well, it may not be completely sealed. This can happen due to the dirt accumulated on the rubber of the door.

Finally, it is to be expected that another part of our washing machine has been damaged if water seeps underneath. In this particular case, we could detect what is wrong and change it ourselves (if you are a handyman) or call for technical service.

How to prevent water from running under the washing machine

Now that we know the possible causes that cause our washing machine to lose water underneath, we will try to give some tips so that this does not happen in the future.

  • Too much laundry: This is about not adding so much soap, especially if you combine it with fabric softener, as this will cause even more suds which can lead to leaks. Therefore, if you use both, you can try adding half the detergent you used to put on.
  • Enter the exact weight of the clothes that your washing machine is capable of supporting. Do not exceed it under any circumstances, as you could also damage the machine’s centrifuge motor.
  • Check the drain hose connected to the drain. Is it plugged in? Is the tube defective? Do you see any holes or corrosion?

how-to-prevent-water-from-under-the-washing-machine-causes

  • Drain plug: If your washing machine is new, it may come with a drain plug from the manufacturer itself. This plug needs to be removed once we start the device so make sure it is not plugged in.

What to do if water comes out from under the washing machine

So far we have talked about prevention instead of acting. But if your washing machine, unfortunately, has already experienced a water leak, now is the time to act. Before touching anything, it is strongly recommended to carefully read the instructions of the manufacturer of our washing machine, in order to know its settings and correct operation.

The first step will be to place the washing machine on a stable and above all flat surface. For example, and with great care, we can lift the machine on a pallet, or place metal supports on its base. In this way, we can observe precisely where the water is filtered. Then we run a washing program and fix the location of the drip.

what-to-do-if-water-comes-out-of-the-washer

An easy check to see if it is excess soap is as follows: do normal laundry and, when removing clothes, take any clothes to place in a container with water. . If soap appears in the water, it means that we are using too much detergent.

It is a very good habit to pay attention to our washing machine and to “take care of” it. But we are not only talking about using products that wash the interior or remove limescale, but also a more thorough maintenance of its internal and external parts. For example, if your washing machine is old, changing the drain hoses every now and then is a great idea, as the passage of time causes them to corrode or give on their own, causing the dreaded leaks. Keep in mind that the water pump that carries water from the tubes to the machine is also often an epicenter of deterioration and leaks.

Use of images:

wikihow.com

wikihow.com

DIY.facilisimo.com