That chairs are one of the most surprisingly priced, overlooked products is a fact. That everyone has old and useless chairs at home is too. And that by adding the colon, we can have a new personalized chair, a reality that we will outline to you right away. And today we show you how to restore a chair and stuff it step by step

How to restore a chair and upholster it step by step

Going to ask for the price of a chair and the heart is about to go out when we are told, is something that has happened to everyone. Chairs are a very expensive but necessary product. For this reason, knowing how to recover an old chair that we have at home, or more, can mean a considerable saving in euros. Hence the importance of learning how to restore a chair and stuff it step by step.

What kind of chairs? Anyone can be restored. Of course, to pad them, obviously they must have padded seats. So when it comes to showing you how to restore a chair and upholster it step by step, we’re going to stick to those Louis XV inspired chairs that are in the home of every self-respecting grandfather.

Obviously the first thing to do is grab it for use, so we’ll start by telling you how to restore a chair.

How to restore a chair step by step

If we want to know how to restore a chair step by stepThe first thing to do is to prepare the chair itself for its renovation.

Remove the folder

The first thing to do is, in case they have it, remove the wicker rack They have most colonial upholstered chairs. To remove it, cut it directly. You can use some shears, a cutter or a knife, but always with great care. Start at the perimeter and go around all of the wicker backing until it is completely removed.

If you want to avoid cuts, cracks and sores which can be bothersome and painful, please feel free to put on protective gloves. It will be more uncomfortable and hot, but your hands will be protected.

Remove the fabric covering the seat

We have already removed the support, now is the time to do the same with the old fabric that covers the seat. To do this we will need a barrette and clips. Obviously, don’t take off your glovesWell, now they’re no longer needed, if possible. It is convenient to try to remove it without breaking it, so that the old fabric will serve as a pattern for the new one you are going to put on, without it being too much or missing.

So, we remove the nails or staples that hold the fabric on the chair one by one. We take them out with the bar and finish removing them with the pliers. It is a tedious but necessary step.

Paint the chair

With the chair in wicker and nude fabric, it’s time to paint it and if necessary treat it. Therefore, before you start painting, you need to carefully consider the entire outline of it, in search of the woodworm.

If you find woodworms, you will need to apply a specific product to remove it before continuing. When you have done this you need to cover the holes created by the woodworm with putty, wait for it to dry and polish them with sandpaper

Once the chair is ready, it’s time to apply the paint. In that case we will use Chalk Paint. It is a paint whose main ingredient is chalk, which allows full adhesion to wood. Even if the first coat of paint looks good, feel free to add one or two extra layers, when the previous one has dried. This way you will get a smooth and professional paint.

Vintage touch

With the paint already applied, we have to realize that we have an old chair that we are in the process of restoring, so we have to adapt the design of the chair to its restoration. That is to say, give the chair an aged point. To do this, the first thing to do is to apply medium grit sandpaper to remove the paint from some areas and get what this is called stripping, which is nothing more than an aged appearance.

To achieve this result, you have to sand in areas, insisting on an area so that the stripping is greater or lesser, according to your taste. As a guide, we recommend that aging occurs in the areas most worn out by use. We are talking about moldings and reliefs, where they are taken more often, so that the result is more natural.

When you are done sanding it, remember to remove paint dust with a rag. If you don’t, it will stick to your chair when you take the next step.

Varnish protection

It’s time of protect the chair against possible attacks. To do this, we will apply a layer of varnish, in that case, ultramatt. It is a transparent varnish which will not change the final color of the chair, but it will be a protective layer that will give it greater durability.

If you wish to seal this protection, let it dry for the time specified by the varnish manufacturer and apply another coat. It will also not affect the color and you will have a double protective barrier

Pad the seat

With the chair ready, it’s time to stuff the seat. Although before doing so, it is convenient to check its condition to see if there are any areas to be repaired. Not to need it, we are going to take advantage of the layer of foam it had but we are going to add one more. Thus, we will improve the firmness and increase the height of the seat.

To cut out the foam, which is similar to a mattress, one can use the patterned chair itself or make a cutout with cardboard and pencil. When you have cut the foam, staple it to the seat so that it does not move. Make sure the staples are close together so that it is tight, elegant and uniform.

With the foam in place, it’s time to prepare the fabric for putting it on. Take the old fabric as a pattern and cut the new top, leaving a margin of five centimeters for the excess. Remember that you put in more foam and you need more fabric.

To put on the rag, Place four staples as a cross guide. This will keep the fabric taut and positioned so that you can start stapling around the entire perimeter. If you have a lot of fabric left over, you can fold it inward before stapling or cutting with scissors if it’s too bulky.

Fill the backrest

To renew the support, we will do the same as with the seat. We take two pieces of fabric, in this case with three more centimeters and we will cover the back area. The first piece, we fix it to the backrest and we staple it. Then we put a piece of foam, and on top of it the fabric similar to the one we put on the seat.

Try to gather the staples and stretch the fabric well. It’s not easy, so don’t be in a rush. And you will have your chair renewed and upholstered.

You may also like: